Unit Installation

Tool Requirements

The installer needs the following tools:

Multimeter with range 300 V AC ~ 1% and 30 V DC = 1%, internal resistance over 100 kΩ, equipped with 2 measurement wire grips
Tape measure
Socket wrench of 7 mm (0.28 in.)
Set of metric Allen keys
TorX key reference # 10
Spirit level
Plastic mallet
Impact drill with a set of drill bits from 3 to 13 mm (0.12 to 0.51 in.) suitable for the wall material
Small screwdriver of 3 mm (0.12 in.) for electrical connections
Medium screwdriver
Plastic clamps to attach cables
Three-wire power supply cable (2 conductors + ground). For more information, see the Electrical Requirements section.
Cable of 2 x 0.22 mm² (2 x 24 AWG) needed for the Irix unit and if you use the optional remote exposure switch with a standard wall-mounted unit.
To mount the wall framework, use the mounting tools suitable for the specific type of wall. For more information, see the Mechanical Requirements section.

IMPORTANT: The tool references mentioned in this manual are ISO tool references.

The installation requires one technician.