Installing the Unit

Before you install the unit, carefully unpack and check that you have all the:

IMPORTANT: The unit is provided with a wall framework that by default requires an installation that orientates to the left.

Preparing for Installation

For all installations, you must install the control timer unit at a place where:

You can see:
- The selected parameters on the control timer unit.
- The patient from where you operate the control times unit.
There is a minimum distance of 2.5 m between you and the patient.

CAUTION:

Make sure that you have the required installation cables.
Check that the voltage displayed on your generator label corresponds to your power supply voltage.
Check that jumper positions on the wall framework main powerboard matches the used voltage.