Network Configuration-OLD

Fully automatic

Uses Bonjour to automatically detect device and uses DHCP (dynamic host configuration protocol) so manual static IP address assignment is not required. See:

• Checking Dynamic Attribution of IP Address
• Activating DHCP Configuration 

Automatic device detection and static IP address

Uses Bonjour to automatically detect the device and allows you to assign a static IP address. You can either:

• Use the default IP address (192.168.17.3) assigned to the RVG Connect unit (see Assigning Default Static IP Address with Automatic Device Detection).
• Manually enter an available IP address (see Manually Assigning Static IP Address).

Manual

Manual workstation configuration with a static IP address using the RVG Service Tools; this is used when Bonjour is not installed (see Assigning IP Addresses to RVG Connect Unit Using RVG Service Tools without Bonjour).

Alternatively you can manually enter an available IP address directly on the RVG Connect unit (see Manually Assigning Static IP Address).