Before acquiring each image, make sure that you have:
Selected the patient record.
Accessed the Imaging window.
Accessed the Acquisition interface.
Selected the correct positioning accessory.
Positioned the patient correctly.
To acquire a panoramic, TMJ, sinus, or 3D image:
Leave the x-ray room and close the door. You must keep visual contact with the patient during acquisition.
Important: To stop the acquisition in an emergency, release the exposure button on the remote control or press the red emergency stop button.
Launch the x-ray with the remote control. Press and hold the exposure button until you see the on-screen Release Hand Switch message. The Ready Indicator turns yellow, and a warning is sounded, indicating x-ray transmission.
When the acquisition ends, the Acquisition interface disappears, and the acquired image is transferred to the Imaging window.
Check the image quality.
When the acquisition is complete:
Open the temple supports and release the patient from the unit.
Remove the hygiene barrier from the bite block and any accessories that were used.
Reset the unit rotative arm for the next acquisition.