Setting RVG Preferences

On the RVG Processing Preferences tab, you can set the RVG processing preferences.

To set RVG preferences:

Set the following Acquisition preferences:
Synchro-link installed—Select to install a CCX synchronization link and timer. The Acquisition icon is permanently displayed in green when the synchronization timer is turned on, and exposures can be made at any time.
Display button to manually connect RVG 6500 sensors—When you select this option, an additional button is available that allows you to connect the RVG 6500 sensor to the computer.
Save images to same tooth number as active image—When you select this option, you can acquire RVG to the same tooth number as the RVG image displayed in the Image Viewing Workspace. This is useful for endo treatment.
RVG5—From the drop-down list, select one of the following options:

Hi Resolution (HR)—This is the default setting for the RVG5 sensor. It is used to acquire images with the maximum detail.
Hi Sensitivity (HS)—This setting acquires images with less detail, but requires less radiation and is therefore recommended for pregnant women or young children.

Network shared folder path for RVG synchronization files—Configure the location used to store RVG synchronization files.
Set the following Acquisition settings:

Sharpness filter—Select to have image details sharpened with increased contrast.
Anatomical mode—From the drop-down list, select an option:
Perio—Optimizes the display of periodontal tissues.
Endo—Optimizes contrast values to display canals and roots.
Dentin-to-enamel junction—Strongly accentuates contrast values in the more radio-opaque tissues at the crown, the amelo-dentinal junction, and the roots. This mode provides a clear display of any caries or lesions.

Set the following Image processing preferences—The options available here vary according to the RVG acquisition hardware connected to your system. If you previously used Carestream Dental imaging software as your image analysis tool, these settings will automatically be retained in CS Imaging.
RVG 5100/6100—From the drop-down list, select one of the following options:
6500 contrast
Optimized contrast and sharpness
Higher Sharpness

Note: These options must be the same as the processing configuration of your RVG sensor.

RVG 5200/6500—From the drop-down list, select the applicable sharpness filter strength.
RVG 6200 Favorite selection and customization—Click to configure and select filter favorites in the CS Adapt Library.

Note: You can also adjust contrast settings for RVG images post acquisition using the Image Processing tool in the Control Panel.