Setting Preferences in CS Imaging
These preferences enable you to set parameters that control how images appear on the screen and what you see when the software starts up.
To configure the Imaging preferences, follow these steps:
In System icons, click . The Preferences window is displayed.
Click .
Configure the following settings:
Image overlay color |
Select the color of text information overlays for your images. |
Tooth numbering system |
Select either ADA (American) or FDI (European). |
Inside looking out |
Select to see all x-rays from inside the patient’s mouth looking out. The left side of the image on the screen corresponds to the patient’s left side. If this option is not selected, the left side of the image on the screen corresponds to the patient’s right side. The molars on the right side of the patient's head appear on the left side of the screen. |
Blue filter |
Select to apply a blue tint to all images, giving the images the appearance of traditional x-ray images. |
Monitor test pattern |
Select to see a test pattern the first time you launch CS Imaging on a given day. Use the test pattern to calibrate your computer monitor to properly render radiological images. |
Display brand logo on images |
Select to show the equipment brand logo when you view an image in the Image Viewing Workspace or Darkroom mode. |
Display dosimeter on newly acquired images |
Select to see, when available, a dosimeter reading on the newly acquired images. Note: Once the new image has been saved, the dosimeter reading is only displayed on the Image Information window. See Displaying the Image Information Window. |
Display calibration indicator on images |
Select to see the calibration image on images. See System-Generated Image Overlays. |
Reset all warning messages |
Select this button to reset all warning message settings. |
Choose default program |
For CS Model, CS Restore, CAD, and 3D files, select a default program to open these files from the drop-down lists. |
Click Save to close the window and save your changes.