CS 7600 is a scanner system for intraoral x-ray exposed imaging plates. The CS 7600 is intended for digital dental radiography using an imaging plate—storage phosphor plate—for radiographic diagnostic intraoral images. The CS 7600 system is used to scan and review intraoral dental x-ray images.
When scanning the x-ray exposed imaging plate, a digital image is previewed on the scanner’s LCD and saved to the scanner’s internal memory. After scanning, the scanner erases the imaging plate and ejects it. The imaging plate is ready for re-use.
The exam acquisition’s scanned image is sent over the network to the workstation’s image Acquisition interface. Using the Acquisition interface, the image is processed and reviewed. The Acquisition interface sends the images to the CS Imaging software, which archives the acquired images.
The scanner connects directly to the network or is connected peer-to-peer to the workstation. The scanner can be placed on a desk/counter top or mounted on a wall, using a special shelf (adapter).
The following components comprise the hardware of the CS 7600:
CS 7600 unit
Intraoral imaging plates
Protective sheaths
Power supply and adapters
USB cable
The following figure shows a front view of the CS 7600:
The following figure shows a rear view and the cables compartment of the CS 7600:
The CS 7600 works with five imaging plate sizes: 0 to 4. The scanned image
file size depends on the imaging plate size and the scanning resolution
set by the user. The smart function of the imaging plates is utilized
when using the Scan and Go device.