Using the SoftDent Charting Module

Using the X-ray Menu

The commands available from the X-ray menu are:

• PW DICOM Imaging:This command is enabled if you use PW DICOM Imaging software. Select this command to access the software.

• Start Carestream Imaging Software:This command is enabled if you use the CS Imaging software. Select this command to access the software.

• Capture Pano Image:This command is enabled if you use the CS Imaging software. Select this command to access the software to capture a panoramic image.

• Capture 3D Image:This command is enabled if you use the CS Imaging software, version 6.8, and have installed the 9000 3D extraoral imaging system. Select this command to access the 3D Acquisition window to capture a 3D image.

• Capture Ceph Image:This command is enabled if you use the CS Imaging dental imaging software. Select this command to access the software to capture a cephalometric image.

• Capture RVG Image:This command is enabled if you use the CS Imaging software. Select this command to access the software to capture an RVG image.

• Capture Intraoral Image:This command is enabled if you use the CS Imaging software, version 6, and have installed the 1000 intraoral video camera. Select this command to access the software to capture an intraoral image.

• Capture CR Image:This command is enabled if you use the CS Imaging software and have a CR 7400 installed. Select this command to access the software to capture an image.

• Capture Intraoral Scan:This command is enabled if you use the CS Imaging software. Select this command to access the software to capture an intraoral 3D model using the CS 3500 or CS 3600.

• Capture CS 3DIO Image:This command is enabled if you use the CS Imaging software. Select this command to capture an intraoral image using the CS 9000 or CS 9300.