Displays the software online Help system.
Closes the charting module to return to the previously opened window in the software.
Saves changes made to the open chart.
Prints a patient chart. See Printing Charts.
Select Full
Mouth to display all four quadrants.
Select Quad 1 to display
the first quadrant.
Select Quad 2
to display the second quadrant.
Select Quad 3 to display
the third quadrant.
Select Quad 4 to display
the fourth quadrant.
You can also access the quadrants by using Ctrl + the quadrant
number or from the View menu.
Maximizes the chart and hides the Clinical Detail Tab Container.
Displays the Clinical History tab in the Clinical Detail Tab Container section.
Displays the Clinical History tab in the Clinical Detail Tab Container section.
Maximizes the Clinical History tab in the Clinical Detail Tab Container section.
Maximizes the Clinical Images tab in the Clinical Detail Tab Container section.
Displays the Provider List window. In this window, you can select the provider for the chart. You can also access this command from the Chart and Perio menus.
Displays the Patient Clinical Notes List window. In this window, you can associate clinical notes with a chart.
Accesses the CS Imaging software, where you can manipulate and re-save previously acquired images using the dental imaging software tools. New images cannot be acquired using this button. This command is enabled only if you are using SoftDent Cloud.
Accesses the CS Imaging software to acquire patient images. This command is enabled only if you are using SoftDent Cloud.
Accesses the CS Imaging
software.
This command is enabled only if you use CS Imaging software.
Accesses the CS Imaging
software to capture a panoramic image.
This command is enabled only if you use CS Imaging software, version
6 or higher, and have installed the 8000, 9000, or 9300 panoramic
unit.
Accesses the 3D Acquisition window of the 9000 3D system, enabling you to capture a 3D volume. This command is enabled only if you use CS Imaging software, version 6 or higher, and have installed the 9000, 9300, or 9500 3D system.
Accesses the CS Imaging
software to capture a cephalometric image.
This command is enabled only if you use CS Imaging software, version
6 or higher, and have installed the 8000c, 9000c, or 9300c panoramic
and cephalometric unit.
Accesses the CS Imaging
software to capture an RVG image.
This command is enabled only if you use CS Imaging software, version
6 or higher, and have installed the RVG 6000 digital radiography
system.
Accesses the CS Imaging software to capture an intraoral image. This command is enabled only if you use the CS Imaging software, version 6 or higher, and have installed the 1000, 1200, 1500, or 1600 intraoral video camera.
Accesses the CS Imaging software to capture a CR image. This command is enabled only if you use CS Imaging software, version 6 or higher, and have installed the Carestream Dental CR.
Accesses the CS Imaging software to capture an intraoral 3D model using the CS 3500 or CS 3600. This command is enabled only if you use the CS Imaging software and have installed the CS 3500 or CS 3600.
Accesses the CS Imaging software to scan a 3D object using the CS 9000 or CS 9300. This command is enabled only if you use the CS Imaging software and have installed the CS 9000 or the CS 9300.
Starts the MedVisor software. This command is enabled only if you have installed the MedVisor software.