Using Additional Modules, Products, and Services > Additional Products > Using the Patient Education Integration

Using the MediVision Communicator Software in OrthoTrac

If you have purchased the MediVision Communicator software, you can set up the MediVision Communicator Integration window and launch the MediVision Communicator software from inside OrthoTrac.

To configure the MediVision Communicator integration:

1. From the main menu, select Functions > Maintenance Set-up > Patient Ed Integration. The Patient Education Setup window is displayed.

2. You must have security access to configure this integration. See Setting Up Security Permissions for more information.

2. Select MediVision CiC Pro. The Setup button is enabled.

3. Click Setup. The Patient Education Setup window is displayed with the default CiC Pro program path.

4. Select the path for the MediVision CiC Pro software, and click OK.

You can launch the MediVision Communicator software from the following areas:

• Main menuMain menu

  Select Functions > Patient Chart > Launch Patient Ed.

• Patient chartPatient chart

  Select Functions > Launch Patient Ed.

• Patient Information windowPatient Information window

  Click the Patient Ed. button at the bottom of the window.

• Charting moduleCharting module

  Click the Patient Ed. button at the bottom of any of the tabs.

• Point-of-care modulePoint-of-care module

  Click the Patient Ed. button at the bottom of the Charting window.

• Patient trackingPatient tracking

  Select Functions > Launch Patient Ed.

Related Topics

Using the Patient Education Integration

Using the MediVision Communicator Software Integration Window