Managing Panoramic and Cephalometric Images > Acquiring Panoramic and Cephalometric Images

Setting Cephalometric Imaging Preferences

To set options for working with cephalometric images:

1. Click . The CS OMS Imaging Software Preferences window is displayed.

2. Click the CS X-Ray tab.

3. In the Ceph section, select one of the following Sharpness Filter options:

4. Sharpness:Applies Sharpness filter to the image.

5. No Sharpness:Displays an unfiltered image.

6. Linear:Select to display images with a default pseudo-gamma value of 48.

7. Optimized Contrast:Select to increase the contrast.

8. Bone Density:Select to display the optimal contrast for analyzing bone density.

9. Edges:Select to display the optimal contrast for identifying the edges in an image.

• The Sharpness filter options available on this tab depend on the imaging hardware installed on your system.

5. • The filter off option is the default.

4. Select Apply Sharpness FilterSelect to apply the Sharpness filter to acquired x-ray images, increasing the contrast and simplifying the identification of grayscales contained in the x-ray image.

5. Select Mirror Lateral Ceph DRThis option is available only for cephalometric images acquired using the CS 8000C digital cephalometric unit.

6. Click OK.

Related Topics

Using Digital Panoramic and Panoramic Systems

Using the CS 9000 Extraoral Imaging System